Hybrid vehicle didactic trainer(electricity and gasoline)Engine:model 8ZR-FXE.Inline four cylinder four stroke,Electronic ignition (Coil-On- Piug),Mulipoint  electronic  fuei   injection,16  valves,Compression   ratio  13,DOHC,VWT-i,Maximum  power  72kW196HR,Maximum  torque 142N-m
MG  2: maximum power 53KW/71HP Maximum torque 163N-m.
Complete didactic training vehicle for Gasoline and electricity(Hybrid)Toyota corolla type,Manufactured in 2022 or 2023,demonstrable by scanner,1800   cc   displacement, new 4 cylinders,gasoline  fuel,electronic   injection system,Gasoline   and    Electric   Technology,600   V electrical voltage and electric motor.
Educational trainer type full  hybrid  vehicle.96  HP  @5.200  rpm  gasoline  engine,electronic  injection  system,direct  ignition  system,hybrid technology(gasoline and electric).Total  power  of  internal  combustion  engine,electric  motor,generator  and  batteries:121HP.MG1  electric  motor  (synchronous  with  permanent  magnets,71HP).Maximum  voltage  of  the  electric   motor  600V,Nickel-metal   hydride (Ni-Mh)hybrid battery (201.6 V,6.5A-h).
E-CVT automatic gearbox with planetary gears.Complete exhaust system,catalytic converter.Starting and charging system,engine cooling system,air  supply  system,accumulator,battery,relay,fuses,main  power  switch.Two  ignition  keys.air  supply  system,acceleration  pedal, original instrument panel with all the original signs of the vehicle working at 100%.
External  board,FXB-H01005  for  measurement  of  sensors  and  actuators  in  real  time,with  electrical  wiring  diagram  and  connectors  for measurements.It will be equipped with a wireless system to insert and eliminate faults through a tablet PC(Included).Diagnostic connector. Fuel tank with fuel cap and fuel level signal sender unit for display on instrument panel.
The educational vehicle will have all its original components,internal combustion engine,electric motor,transmission and all the original systems of the vehicle and will work correctly,it will be possible to start it,make measurements with the scanner,it will be connected to the external dashboard and measurements can be made in realtime at the different points of the dashboard,the vehicle can be operated and driven.
The vehicle will have original chassis and original bodywork,which will have cuts for didactic purposes to show the internal structure:  inverter,HV battery,hybrid power ECU,front and rear fenders,rearview mirrors,driver side /passenger side/left rear and right rear doors, engine hood,roof,air intake grille.All of the cutaway surface are covered with 3mm transparent acrylic board it will be ensured that the edges of said cuts do not constitute a danger to users.Automotive scanner for diagnosing and troubleshooting faults in the vehicle,Wireless intelligent fault-setting and appraisal system.
A protective cover for the car and the panel will be delivered.
Technical induction for use,operation,maintenance and safety instructions will be given.(40 hours)
Manual of technical specifications of the engine,electrical and electronic system,in English will be delivered.
Manual of practices and insertion of faults will be delivered.Vehicle manufacturer manuals.
Three  special wiring  harness  are  provided  for  connecting  the  vehicle  and  panel.One  for  connecting  engine  ECU,the  second  one  for connecting hybrid power ECU,the third one for connecting dashboard and air-conditioning system.
1.Three  special  wiring  harness  are  provided  for  connecting  the  vehicle  and  panel.One  for  connecting  engine  ECU,the  second  for  connecting hybrid power ECU,the third for connecting dashboard,the fourth for connecting air-conditioning system.The dashboard and air-conditioning system has extension wiring harness for connecting the panel,so teachers no need to disassemble and assemble the parts every time.
2.The  surface  of  the  following  parts  are  cutaway  to  show  the  internal  structure:inverter,HV  battery,hybrid  power  ECU,front  and  rear fenders, rearview mirrors,driver side /passenger side /left  rear and  right  rear doors,engine  hood,roof,air intake grille.All of the cutaway surface are covered with 3mm transparent acrylic board.
3.The definition of engine ECU pins and hybrid power ECU pins are provided.The waveform analysis of engine control system and hybrid power control system are provided.
4.The 4mm thick aluminum-plastic panel is painted with color circuit diagram of the engine control system and hybrid power control system,  the name of relevant main components are painted at the original location of circuit.The trainees can leam and analyze the working principle of engine and hybrid power control system by referencing the circuit diagram and the real components in vehicle.
5.The vehicle has dashboard to illustrate changes of parameters in the power transmission process,speed,coolant temperature,electronic control system failure indicating light.Additional fuel pressure meter and vacuum pressure meter are installed for measuring the fuel pipe pressure and engine vacuum pressure.The multimedia display screen.
6.Detection  terminals  are  installed  for  measuring  resistance  /voltage  /waveform  signals  of  various  sensors  /actuators  /engine  ECU  /  hybrid   power   ECU   by   multimeter   and   oscilloscope.
7.The training panel is installed with OBD ll diagnostic socket,which can connect to scanner to read fault codes,clears fault codes and reads data stream from the engine,automatic transmission,hybrid power,ABS,EPS of vehicle.An emergency switch is installed on panel for safety consideration.
8.The vehicle has accelerator pedal and brake pedal for acceleration and deceleration.Lockable casters are installed on the base frame of panel to make it stable and movable.
9.An emergency switch is installed on panel for safety consideration.
10 Lockable casters are installed on the base frame of panel to make it stable and movable.
11.The language is Spanish for the panel,the vehicle dashboard is English.
12.Equipped with wireless intelligent fault setting and appraisal system by tablet PC,
13.Compliance with ISO and CE standards.
14.High-voltage safety protection tools:gloves made of natural rubber withstand of 1000V DC,medium size.Goggles:colorless glasses, effectively prevent arc and general physical shock damage to the  eyes.
15 .The equipment is provided with operation manual and maintenance  manual.It's  helpful for training  and  leaming.Technical specifications manual for the engine,electrical and electronic systems.
Cover for car and cover for panel included
Tablet included