ii. Features
1. The main components are installed on the bench, and the electrical connection method is the same as that of the real vehicle. It can be easily disassembled after the power is off, so that students can learn and master the disassembly and assembly points of the air-conditioning system components (according to the overall wiring requirements, some fuses and relays are moved to on the corresponding stand).
2. The training bench can carry out practical projects such as adding refrigerant and leak detection.
3. With the help of the original factory data, the main component functions and pin definitions are fully described on the device.
4. The panel fully displays the working principle diagram of the air conditioning and heating system, and installs the detection terminals. With the help of the multimeter and the oscilloscope, the parameter changes in various states can be detected in real time.
5. The training bench is also equipped with an air-conditioning compressor, which is displayed in the form of separation and dissection to clearly understand the internal structure and working form of the electric air-conditioning compressor of the refrigeration system.
6. The training bench is welded and assembled with high-strength carbon steel. After the carbon steel is derusted, the exterior is painted by high temperature electrostatic powder spraying process. There are 4 casters installed at the bottom of the training bench, which can move flexibly. At the same time, the caster has a self-locking device, which can fix the position.
7. Equipped with a wireless intelligent fault setting module, the teacher sets the fault, and the students analyze and find the fault point. The main components are led out of the detection port, and they are directly detected at the fault location to master the fault handling ability.
iii. Basic Parameter
1. The external working power supply of the equipment: 220V AC, the power is not more than 500W.
2. Equipment working temperature: -20°~+40°
3. Dimensions of the main body of the stand (mm): not less than 1600*1200*1000 (length*width*height)
4. Dimensions of the testing bench (mm): not less than 1600*700*1730 (length*width*height)
5. Electric compressor: turn three-phase AC 244.8V
Basic structure: scroll
iv. Basic Configuration
2 electric air conditioner compressors, 1 condenser, 2 electronic fans, 1 brand heater, 1 set of evaporator assembly, 1 PTC heating module, 1 air conditioner amplifier, 1 air conditioner control panel, 1 wireless fault setting system motherboard, 1 movable platform and 1 teaching board, etc.