1. One mainstream original car supercapacitor module is generally composed of 18 automotive supercapacitors in series with low internal resistance and high power, and its rated voltage is 48V and rated capacity is 165F. With the help of the automotive-specific clamp meter, it can safely measure the voltage of different supercapacitor, and help trainees to understand the series composition of automotive supercapacitor modules.
2. The training bench is equipped with an adjustable DC regulated power supply, and the voltage can be adjusted. With the help of an adjustable DC regulated power supply, the automotive supercapacitor module can be recharged. And the voltage change of the supercapacitor during the charging process can be measured with the help of the matching clamp meter for automobiles.
3. The training bench is equipped with the matching outer rotor hub permanent magnet synchronous motor drive system to realize the discharge process of the automobile supercapacitor. And the voltage change of the supercapacitor during the discharge process can be measured with the help of the specific clamp meter.
4. Equipped with a single supercapacitor. The internal resistance and insulation of a single supercapacitor can be measured with the help of the specific clamp meter and insulation tester.
5. Equipped with a single sectioned supercapacitor to help students understand the internal structure and composition of automobile supercapacitor.
6. The training bench is composed of a platform and a teaching board. A three-dimensional anatomical map is drawn on the teaching board which is placed vertically to introduce the composition, structure and basic parameters of this type of power battery module.
7. The main material of the training bench is made of 40*40 aluminum alloy, which is artistic and solid. There are four casters at the bottom, which can move flexibly. And the casters have self-locking devices, which can fix the position.
8. The training bench is equipped with a automotive specific clamp meter and a high-voltage test pen, which are used to measure the voltage, current and other parameters of the control line.
9. (Optional) The training bench is equipped with a teaching resource package software for the structural composition of new energy vehicle parts, which adopts a three-dimensional animation mode to describe the structural composition of automobile supercapacitors in detail. Each main component can be opened by clicking, and has basic parameters and performance descriptions. The intelligent courseware is installed with a U disk, and can be played directly after being inserted into the computer, which is suitable for practical teaching.

1. Dimensions of the platform (mm): ≥700*700*1410 (length*width*height)
2. Dimensions of the teaching board (mm): ≥700*700 (length*width)
3. Equipment working power: 220V AC, power not more than 500W
Equipment working temperature: -20℃~+40℃
4. Automotive supercapacitor
Number of serial sections: no less than 18 sections
Capacitor Type: Cylindrical
Rated voltage: 48V
Rated capacity: 165F
Internal resistance: ≤mΩ
Maximum continuous current: 132A
Maximum peak current: 1900A (working time < 1 second)
Stored energy: 52.8Wh
Energy density: 3.72Wh/Kg
Total quality: 14.2±0.5Kg
5. Adjustable DC regulated power supply (for recharging the supercapacitor module)
Input power: 220VAC/50HZ
Output voltage: 0 ~ 48VDC (adjustable)
Output current: about 5A
6. Outer rotor hub permanent magnet synchronous motor (for discharging the supercapacitor module)
Size: not less than diameter 126.5* thickness 36mm
Weight: about 300g
Hollow shaft: Φ23mm
Stator: not less than diameter 115* thickness 10mm
Slot pole configuration: 27 slots and 30 poles
Working voltage: DC12V~48V
No-load speed: 2052rpm/48V
Rated voltage: 48V
Rated power: 400W
Rated current: 10A
Conversion efficiency: not less than 86%

1 Automotive supercapacitor module (including 18 capacitors, which can be charged and discharged normally), 2 Automotive supercapacitors (1 for anatomy, 1 for performance parameter testing), 1 Adjustable DC stabilized power supply, 1 open motor controller circuit board, 1 Fully transparent outer rotor hub permanent magnet synchronous motor, 1  Digital automotive clamp meter, 1 High voltage test pen, 2 Flat head screwdriver, 2 Phillips head screwdriver, （Optional）1 U disk (with matching teaching resources courseware), Movable aluminum alloy platform and teaching board