1. Display the working process animation of the blind spot detection system and the original installation position through the touch screen PC installed on the panel.
2. When steering the ignition switch to ACC/ON gear and the millimeter wave radar detects a vehicle in the rear,a warning signal is sent out to the corresponding position rearview mirror to light up the yellow warning light.
3. When the steering light switch is  on, the millimeter wave radar detects a car in the blind spot behind and sends an acoustic signal to the corresponding position rearview mirror to light up the red warning light and the buzzer emits a warning tone to warn the driver to stop changing lanes.
4. The product is fully reflect the principle of millimeter wave radar cone electromagnetic wave emission。 when the target is close to the radar antenna, the reflected signal frequency will be higher than the transmitter frequency. Conversely, when the target moves away from the antenna, the reflected signal frequency will be lower than the transmitter frequency.
5. The system can detect the distance of the target through the relative speed of the target and the radar, and the time difference between the transmitted pulse and the received pulse.
6. Left and right millimeter wave radar: installed in the rear of the panel on the left and right both sides, in detecting whether there are vehicles approaching in the blind area.
7. The left and right warning lights are respectively installed in the upper left and upper right corners of the rearview mirror, consisting of red and yellow lights. The yellow light has the function of reminding the car coming from behind, and the red light has the auxiliary warning function of lane change.
8. Equipped with a buzzer, when steering on the steering light to change lanes, it detects that there is a vehicle in the blind area, and provides an early warning sound alarm function.
9. The panel is installed with radar system circuit diagram and wiring terminals for students to measure the voltage, resistance, waveform and other signals.
10. It is equipped with four casters, which can ensure flexible movement. Moreover, the four casters are with self-locking device, which can be fixed position for training purpose. Self-retention wheels are installed to ensure that the stand is flexible, reliable and endurable. 
11. Equipped with an intelligent fault setting and assessment system based on Android (Android) & Windows dual system and wireless network (WIFI). The wireless intelligent fault setting and appraisal system software, include fault setting, troubleshooting and assessment functions etc. Through this, The teacher and student interfaces are separated. Teachers enter the teacher interface to provide test paper and the students answer questions on the ordinary interface. And all the function are done through the wireless tablet. 

1．Training panel size (mm): 1800 x 600 x 1800 (length × width x height)
2．Teaching board size (mm): 1560 x 660 (length × width)
3．Working temperature: -20℃ ~ +40℃
4．Working power supply.
5．Input voltage: 220VAC/10A
6．Operating voltage: 12VDC/220VAC
7．Maximum output current: 10A
8．Short circuit protection: Yes
9．Overload protection: Yes
10．Cooling method: Fan cooling (temperature-controlled)

1 piece of 19 inch touch industrial capacitor all-in-one PC, 2 pieces of millimeter wave radar, 1 piece of buzzer, 1 set of left and right rearview mirror lenses, 2 pieces of steering light switches, 2 pieces of radar fixed brackets, 1 piece of ±12V switching power supply, one set of software(optional), 1 set of intelligent fault setting and assessment system, mobile stand (with universal self-locking casters).