FXB-Z05001 Rotating Hub Test Bench

About Feature Technical Parameter Basic Configuration

It’s an indoor adjustment and testing auxiliary equipment for intelligent connected vehicles trainer, It needs to be used in conjunction with intelligent driving car or wire-controlled chassis, and the vehicle can be lifted for adjusting and debugging. It’s equipped with rollers and can be used for wire-controlled driving system and wire-controlled braking system test. Equipped with front steering angle plate for wire-controlled steering system test and debug. The indoor experiments are not affected by climate and stability of self-driving system, the test conditions are easy to control. Applicable to the indoor testing of automotive intelligent driving function performance.

1. With lifting device, the vehicle can be lifted for adjusting.
2. With rollers, the wire-controlled driving and wire-controlled braking functions can be tested.
3. With the steering angle plate for testing the wire-controlled steering system.
4. With output power detection function
5. With brake performance testing function
6. With counter-dragging function, the counter-dragging motor speed can be adjusted through the inverter, it can simulate the coasting state for a long time.

1. Overall dimension (mm): not less than 3500 × 1500 × 300 (length × width x height)
2. Working power: AC220V
Working temperature: -20℃～60℃
3. AC motor driving system
Maximum power: 5KW
Maximum torque: 50NM

1 set of rotating hub, 2 sets of vehicle fixed belt, 1 set of electromagnetic brake, 1 set of AC motor, 2 sets of drive belt, 2 sets of belt adjusting pulley, 1 set of speed sensor, 1 set of speed signal teeth, 1 set of wheel guide system, 1 set of torque sensor.