FXB-Z07003 Computing Platform Installation and Commissioning Training Bench

About Feature Technical Parameter Basic Configuration

Computing platform installation and commissioning training bench is a special equipment that can be used for theoretical teaching, training and assessment based on the networked teaching vehicle testing assessment standard. The training bench has deployed aluminum alloy housing of computing unit, 4g module, WiFi/4G antenna, serial port conversion board, solid state hard disk, core board of computing platform, 8-way camera GMSL interface expansion board, special jumper cables, special fixing screws, and drawing the internal wiring schematic diagram of the computing unit and assembly process diagram to achieve the principle introduction, structure display, assembly, wiring, debugging, fault diagnosis, data detection and assessment functions. The training bench is also equipped with a special display to install computing unit data display, original factory driver and debugging software, which is convenient for quality detection of computing unit and identifies different models and interface types. It makes it easier for students to master the installation and commissioning ability, fault analysis and processing ability of computing unit. Applicable to the teaching needs of medium and higher vocational and technical colleges, ordinary education colleges and training institutions to test and assessment of intelligent networked vehicle computing platform.

1. The bench is equipped with circuit diagrams and assembly diagrams to guide students in the correct selection and identification of components, and to understand correctly the assembly requirements of the computing platform according to the standards.
2. The bench is equipped with special torque adjustable electric disassembly tool, multimeter, oscilloscope and other instruments to facilitate students' learning and assessment tasks such as tool selection, screw tightening torque adjustment, working power and communication signal measurement.
3. The bench is equipped with parts placement box, which is convenient for placing materials such as aluminum alloy shell of computing unit, 4g module, WiFi/4G antenna, serial port conversion board, solid state hard disk, core board of computing platform, 8-way camera GMSL interface expansion board, special jumper cable, special fixing screws, etc.
4. The bench is equipped with 23.6-inch display, which can display the start screen of computing platform and ubuntu18.04 system desktop in real time
5. With brushing function, has 2 kinds of mode: formatted brushing and partition upgrade .
6. It can repeatedly install the computing platform supporting driver software.
7. With remote graphic interface tool installation function.
8. The desktop adopts shadowless lighting function, which is convenient for computing platform assembly.

Equipment size(mm): not less than 1600 x 800 x 1800(length × width x height)
Computing platform.
1. With 2 high-performance processing chips (64-bit 8-core processor with a main frequency of not less than 2.2GHz and GPU with a main frequency of not less than 1.3GHz)
2. ROM storage space of not less than 64G.
3. With the interface and module requirements: 4G, GMSL camera not less than 8, Gigabit Ethernet switch not less than 2, CAN not less than 2, USB2.0 not less than 1, USB3.0 not less than 4, RS232 not less than 2, TYPE-C interface not less than 1, GPIO not less than 4, 5V (200mA) sensor power output not less than 1.
4. Working temperature: -25℃ to 70℃.

1 set of computing platform shell, 4 pieces of WiFi/4G antennas, 1 piece of serial port conversion board, 1 piece of solid state hard disk, 1 piece of computing platform core board, 1 piece of 8-way camera GMSL interface expansion board, 1 piece of special jumper cable, 1 piece of shadowless lamp, 1 piece of 23.6-inch display, 1 piece of desktop insulation pad, 1 piece of electric adjustable torque screwdriver, 1 piece of test power supply, 10 pieces of accessory boxes