ii. Features
1. Complete and original hybrid power system from Toyota Corolla vehicle, all systems work properly as in hybrid vehicle.
4. Detection terminals are installed on panel, Operators can use multimeter and oscilloscope to detect electrical signals (Such as resistance, voltage, current, frequency signals) from pins of of various sensors & actuators, engine control unit and hybrid power control unit.
5. The training bench is installed with OBD II diagnostic socket, which can connect to automobile decoder to read fault codes, clears fault codes, and reads data stream from the engine and hybrid power control system.
6. A throttle controller is installed on the bench to accelerate and slowdown.
7. A master power switch, coolant tank protector, flywheel protector, among other protection devices are installed on the training bench.
8. Lockable casters are installed to make it lockable and moveable.
9. The language for this equipment can be English or customized language.
10. The equipment is provided with operating manual, it contains the equipment introduction, operation method, components and working principle introduction, fault-setting and troubleshooting process. It’s helpful for training and learning.
11. Equipped with wireless fault-setting and appraisal system, teachers set faults by tablet PC then ask students to detect and find the fault. It’s helpful for teachers to know about students’ learning status, also can improve students’ skills in troubleshooting. At least 16 faults.
12. Compliance with ISO and CE standards.
iii. Basic Parameter
1. Dimensions: 1800mm x 1000mm x 1800mm (length x width x height)
iv. Main constituent components
Detection and control panel (With various detection terminals and color circuit diagram), EFI Gasoline engine (Model 8ZR-FXE: four cylinders four strokes, 16 valves, DOHC, with VVT-i, maximum power 73kW, maximum torque 142N·m) with control unit, E-CVT, Hybrid power control unit, Nickel-Metal High-voltage battery (201.6 Volts, 6.5 A-h, 168 cells) with control unit, Inverter, Dashboard (English language, Mileage less than 50km), Fuel pressure meter, Vacuum pressure meter, OBD II Diagnostic socket, One-key startup switch, High-voltage cable, Gear shift level, Different driving mode switch, Braking system, Fuel pressure meter, Vacuum pressure meter, MG1 (Permanent magnet synchronous motor, maximum system voltage DC 650V), MG2 (Permanent magnet synchronous motor, maximum output power 53kW, maximum output torque 207N·m), Fuel tank, Gasoline feed pump (including the plug), Throttle controller, Inlet and exhaust pipes (including protection covers), Coolant tank (including protection cover), Cooling fan, Exhaust system, Air supply system, 12V battery, Relay, Fuses, Master power switch, EV MODE switch / ECO MODE switch / PWR MODE switch, Wireless fault-setting and appraisal system by tablet PC, Movable framework (with lockable casters), Operation manual.