LANGUAGE
YouTube
XXH-015 Corolla Fault Master
About Feature Technical Parameter Basic Configuration
1. The automobile fault master including engine electronic control system, air conditioning analog circuit, lighting analog circuit, fault diagnosis and display system, fault simulation system, measuring board, chassis, etc.
2.The automobile fault master simulates the common engine failure of the car, judges the possible failure according to the failure, uses the diagnostic measurement instrument to perform measurement and analysis, and completes the troubleshooting practice of the failure.
3.The fault master adopts single-chip technology to control the fault of the engine electronic control system components through the program, and measures the fault parameters or waveforms corresponding to the faults on the sensor and actuator measuring terminals, and then compares with the correct.
4.The fault master simulates 162 faults and is equipped with a teacher manual and a student manual.

1. Fault setting system adopts 0-9 numeric keypad, input the number to complete the fault setting, and the LED display shows the fault setting information.
2. The circuit diagram of the engine electronic control system is distributed on the measuring panel. The circuit color is the same as the original car harness, screen printing.
3.A measurement terminal is provided on the circuit connection for measuring sensor or actuator signal parameters. 
4. The chassis is divided into two parts: the base and the cover. It is made of aluminum alloy or iron standard profiles, with surface anti-corrosion treatment. It can be equipped with 2 movable casters that can be locked.
5. Engine electronic control system’s technical parameters: 1.8L displacement, in-line 4 cylinders, 2 valves per cylinder, and multi-point EFI oil supply.

1.The reference size: 620 * 480 * 310mm (length*width*height)
2.Weight: 5KG
3.Operating voltage: AC 220V  DC 12V

1. Intake camshaft position sensor, including circuit and measuring terminal;
2. Exhaust camshaft position sensor, including circuit and measuring terminal;
3. 1 set of crankshaft position sensor and speed analog disk, including circuit and measuring terminal;
4. Intake camshaft position actuator solenoid valve, including circuit and measuring terminal;
5. Exhaust camshaft position actuator solenoid valve, including circuit and measuring terminal;
6. Injector with circuit and measuring terminal;
7. Evaporative discharge ventilation solenoid valve, including circuit and measuring terminal;
8. Oxygen sensor with measuring circuit and measuring terminal, with fault simulation;
9. 1 set of throttle body, including circuit and measuring terminal;
10. Intake manifold pressure sensor with circuit and measuring terminal;
11. Intake air temperature sensor, including circuit and measuring terminal, with fault simulation;
12. Coolant temperature sensor with measuring circuit and measuring terminal with fault simulation;
13. Knock sensor, including measuring circuit and measuring terminal, with fault simulation;
14. 1 set of accelerator pedal position sensor and accelerator pedal assembly, including circuit and measuring terminal;
15. Three-way catalytic converter failure;
16 Lighting circuit fault simulation: high beam, low beam, left and right turn signals, reversing lights, brake lights, brake switches, warning lights, electronic fans, etc., with circuit diagrams and measuring terminals;
17. One power relay, fan relay, ignition relay, oil pump relay, start relay and high beam relay, respectively, with circuit diagram and measuring terminal;
18. Ignition switch, including measuring circuit and measuring terminal, with OBDII diagnostic interface.