2. It can simulate various states of the vehicle: charging mode, traction mode, key status, parking, acceleration, braking, and shifting.
3. There are digital display speedometers showing the speed of the D and R gears and the speed of the N-gear coasting.
4. The flash LED shows: the direction of the current, the power output of the drive shaft, the direction of travel of the wheel, the gradual increase of the charge state, the gradual decrease of the discharge state, and the power alarm.
5. Set the analog buttons and knobs for charging mode, traction mode, key status, parking, acceleration, braking, and shifting.
6. Set the charging mode, traction mode, key status, parking, braking, and gear LED indicator.
7. By changing the internal control board program, you can perform programming exercises and training for the SCM.
8.The panel is equipped with switches and buttons (press about 1s each time), and the knobs are as follows: power switch, charging button, traction mode button, key status button, shift button P, R, N and D, accelerator pedal knob, and brake pedal button.
1. Power switch - Press this switch to power on the system. At this time, the system has no vehicle speed, gear position and power display.
2. When the brake pedal is pressed, the vehicle display shows that the key status is ON by default (identifiable status), the parking gear is P, the speed is 0, and the power is 100% - the battery indicator light is fully illuminated.
3. Charging button - When the vehicle is at a standstill (vehicle speed is 0, the gear is in P or N position), press this button to indicate that the charging cable has been plugged in. At this time, regardless of whether it is in P or N position, the vehicle is always in the parking state, that is, the P gear. At this time, the key state can be arbitrarily in the identifiable state or the vehicle state is OFF. At this time, if the battery indicator light is not in the 100-full state, the amount of power represented by the indicator light is increased every 3s until the battery is full.
The original power indicator can only be displayed after the key is in the recognition state and the brake pedal is pressed. When the key is in OFF state, it is not displayed. Here, in order to be more visualized, this electric indicator light is always lit regardless of whether the key is in the OFF or ON state.
4. Traction mode button - Press the brake pedal only when the vehicle is in the P position and the key is in ON state. Press this traction mode button to set this function. At this time, the traction mode indicator lights up and the default key is in ON state (the key can be in any state at this time), the gear is in the N position, and the speed is displayed as 0, and the flash LED remains the same. The vehicle is in a freely movable state, and the vehicle can be towed.
When the vehicle moves, if the key is in ON state, the speedometer has a corresponding value with the speed of the vehicle speed. and the flash LED is moving, indicating that the wheel, the drive shaft is moving, and the recyclable power is generated.
When the vehicle moves, if the key is in OFF state, the speedometer displays the value 0, and there is a corresponding value change depending on the speed of the vehicle. However, the flash LED is moving, indicating that the wheels and the drive shaft are moving, and there is a recoverable power generated.
If you want to release the traction mode, you must press the parking button P to return the system to the parking mode. Other methods do not work. If the key is in OFF state, press the brake pedal at this time, and then press the traction mode button. It cannot be set to the traction mode.
5. Key status button - When the vehicle is not in the RND position of the running state, that is, the vehicle is in the parking state P position, charging mode, and traction mode, the key can be selected (simulate the key leaving the vehicle detection range and entering the detectable range) to be in ON or OFF state by pressing the button.
6. Shift button
P gear - If the speed in the D, R, N position is 0, you can enter the P position. If the speed is not 0, you cannot enter the P position. The key is displayed in ON state. Automatically and unconditionally enter this position when the charging cable is plugged in and the key is removed from the detection range. At this time, the flash LED does not move.
N gear - In the P position, the brake pedal can be pressed to enter this position. At this time, the N-speed indicator lights up, and the remaining gear positions are off. Other gears (R or D) can enter this gear directly.
D gear - In the P position, the brake pedal can be pressed to enter this position. Other gears (R, N), when the speed is 2~8KM/H, do not need to step on the brake pedal, directly enter this position.
R gear - In the P position, the brake pedal can be pressed to enter this position. Other gears (D, N), when the speed is 2~8KM/H, do not need to step on the brake pedal, directly enter this gear.
7. Accelerator pedal - Adjust the knob when the gear is in the D or R position, and the value displayed on the speedometer will change accordingly.
8. Brake pedal - Regardless of the state of the vehicle, the pedal is depressed and the brake indicator lights.
9. About system discharge - At this time, in order to indicate that the vehicle is in a power-consuming state, a power indicator is turned off every 3s, indicating that the power is being consumed until the battery indicator is at the last two red indicators, no longer falling, indicating that the vehicle needs to be charged, and the battery is charged. In the alarm state.
10. If the system crashes due to unknown reasons, please power on again after power off.
1. Size: 600*400*180mm （length * width * height）
2. Weight: 5.0KG
3. Operating voltage: AC 220V, DC 12V, DC 5V
1. Speedometer - Display the speed of the P, R, N, D gears.
2. Charging indicator light - Light up when the charging mode button is pressed, and the charging mode button is turned off.
3. Traction mode indicator - After setting to the traction mode, light this light, cancel this mode, and the light goes out.
4. P parking indicator light - When the vehicle is in the parking state, the light is illuminated and in other gear positions, the light is off.
5. If status indicator - Indicate that the key is in the ID state or is in the unrecognized state of the vehicle.
6. Brake indicator light - Depress the brake pedal, illuminate the light, release the brake pedal, and turn off the light.
7. RND gear indicator light - The vehicle is in these gears, and the corresponding indicator lights up.
8. Battery indicator light - When the battery is charged or discharged, this indicator light is correspondingly increased and decremented to light and extinguish, and also used for low battery alarm.